Wallet Closure | 4 ½" wide
Upgrade your handmade wallets and purses with this premium bar channel wallet closure with flip clasp; designed for both style and secure functionality. Perfect for bag makers, sewists, and DIY enthusiasts looking for a professional finish.
This 4.5" (11.43 cm) wallet frame closure easily attaches to the top edge of wallets, clutches, and small bags, creating a clean, polished look while keeping contents safely secured. The flip clasp locks smoothly into place for reliable everyday use.
You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8 are needed, 2 are extra). Each bar has protective plastic that needs to be removed during installation. (Some of the plastic is visible in the photos.)
| Size: | Width: 4 ½" (11.43 cm) |
| Quantity: | 1 x Closure per Package |
Why Bag Makers Love These Closures:
- Open-ended design – works on wallets and bag flaps wider than 4.5"
- Includes 10 screws (8 required + 2 extra for convenience)
- Available in 5 beautiful finishes to match your hardware
- Professional-quality wallet closure for handmade bags and purses
- Secure flip clasp design – snaps closed for added security
- Bar channel construction – slides onto wallet edges for a sleek finish
- These bar closures are open on each end so they can be used on wallets and bag flaps that are also wider than 4.5" wide. They are not closed at the ends, which would limit them on only 4.5" wallets, you can use them on larger sizes and also bag flaps.
Create a professional, boutique-quality finish on your handmade projects with this durable and stylish wallet clasp.
Instructions:
Follow the directions in your particular pattern OR Slide the channels down on to the finished edges of your completed wallet to test fit. Mark holes and if using heavy fabric, poke holes with an awl to allow the screws to enter easily. You will need to cut the opening for the clasp and if desired finish those edges by doing a quick hand or machine basting stitch around them, zig-zag or over cast stitch. Use a small amount of glue in each channel, slide on and insert screws with a mini phillips head screwdriver. The screws are here to anchor it in place while the glue dries, and not meant for complete support. When the screws pass through the glue, they will be secure as well. Primarily, the glue is what keeps your wallet in place. Use a clear drying, fast tack glue, such as E6000, Beacon 3-in-1 or Fabri-tac.
Wallet Closure | 4 ½" wide
Upgrade your handmade wallets and purses with this premium bar channel wallet closure with flip clasp; designed for both style and secure functionality. Perfect for bag makers, sewists, and DIY enthusiasts looking for a professional finish.
This 4.5" (11.43 cm) wallet frame closure easily attaches to the top edge of wallets, clutches, and small bags, creating a clean, polished look while keeping contents safely secured. The flip clasp locks smoothly into place for reliable everyday use.
You put the back on one side and the front (with hole) on the other and pull them together to close your wallet up tight. The flip part clicks in place nicely for security. They are prepackaged and come with 10 screws (8 are needed, 2 are extra). Each bar has protective plastic that needs to be removed during installation. (Some of the plastic is visible in the photos.)
| Size: | Width: 4 ½" (11.43 cm) |
| Quantity: | 1 x Closure per Package |
Why Bag Makers Love These Closures:
- Open-ended design – works on wallets and bag flaps wider than 4.5"
- Includes 10 screws (8 required + 2 extra for convenience)
- Available in 5 beautiful finishes to match your hardware
- Professional-quality wallet closure for handmade bags and purses
- Secure flip clasp design – snaps closed for added security
- Bar channel construction – slides onto wallet edges for a sleek finish
- These bar closures are open on each end so they can be used on wallets and bag flaps that are also wider than 4.5" wide. They are not closed at the ends, which would limit them on only 4.5" wallets, you can use them on larger sizes and also bag flaps.
Create a professional, boutique-quality finish on your handmade projects with this durable and stylish wallet clasp.
Instructions:
Follow the directions in your particular pattern OR Slide the channels down on to the finished edges of your completed wallet to test fit. Mark holes and if using heavy fabric, poke holes with an awl to allow the screws to enter easily. You will need to cut the opening for the clasp and if desired finish those edges by doing a quick hand or machine basting stitch around them, zig-zag or over cast stitch. Use a small amount of glue in each channel, slide on and insert screws with a mini phillips head screwdriver. The screws are here to anchor it in place while the glue dries, and not meant for complete support. When the screws pass through the glue, they will be secure as well. Primarily, the glue is what keeps your wallet in place. Use a clear drying, fast tack glue, such as E6000, Beacon 3-in-1 or Fabri-tac.
HAVE YOU TRIED OUR
INTERFACING!
Support and stabilize your fabric with our Emmaline brand fusible woven cotton interfacing.
We have 3 weights of all purpose, woven, fusible, interfacing suitable for a range of weights of cotton, wool, faux leather, or knit fabric. These work very well to stiffen and add structure to exterior/interior bag outers & linings, pockets, or garments.